diff --git a/README.md b/README.md index 14002e7..f45f2fd 100644 --- a/README.md +++ b/README.md @@ -46,28 +46,6 @@ spice2wireviz design.net --bom spice2wireviz top_level.net --bom-wiring ``` -## Rendered diagrams - -### Inter-module wiring - -How multiple boards/modules connect to each other — power supply, amplifier, and I/O board with shared power and signal routing: - -![Inter-module wiring diagram](docs/examples/inter_module.png) - -### Single-module interface - -External interface of one subcircuit — the amplifier board's connectors and test points radiating from a central port header: - -![Single-module wiring diagram](docs/examples/single_module.png) - -### Hierarchical system - -A complex multi-level system with voltage regulator, main board, sensor module, and external connectors: - -![Hierarchical wiring diagram](docs/examples/hierarchical.png) - -These diagrams are generated automatically by piping `spice2wireviz` output through WireViz (`--render` flag). The layout optimizer minimizes cable crossings — notice how parallel wires between the same module pair are bundled into multi-wire cables. - ## Output examples ### Input: SPICE netlist @@ -346,7 +324,7 @@ The parser extracts subcircuit definitions (`.subckt`), instances (`X*`), and bo ```bash uv sync --extra dev --extra asc -uv run pytest # 194 tests +uv run pytest # 188 tests uv run ruff check src/ tests/ ``` diff --git a/docs/examples/hierarchical.png b/docs/examples/hierarchical.png deleted file mode 100644 index fe669b0..0000000 Binary files a/docs/examples/hierarchical.png and /dev/null differ diff --git a/docs/examples/hierarchical.svg b/docs/examples/hierarchical.svg deleted file mode 100644 index 1cb8675..0000000 --- a/docs/examples/hierarchical.svg +++ /dev/null @@ -1,536 +0,0 @@ - - - - - - - - - -J_USB - - -J_USB - -USB_B_CONN - -3-pin - -GND - -1 - -USB_DP - -2 - -USB_DM - -3 - -SPICE ref: J_USB - - - -W3 - - -W3 - -1x -  -J_USB:1:GND -     1:BK:GND     -X_REG:2:GND - - - -  - -Net: GND - - - -J_USB:e--W3:w - - - - - - -W2 - - -W2 - -2x -  -J_USB:3:USB_DM -     USB_DM     -X_MAIN:2:USB_D- - - - -J_USB:2:USB_DP -     USB_DP     -X_MAIN:1:USB_D+ - - - -  - -Nets: USB_DM, USB_DP - - - -J_USB:e--W2:w - - - - - - -J_USB:e--W2:w - - - - - - -X_REG - - -X_REG - -regulator - -3-pin - -1 - -VIN - -1 - -2 - -GND - -2 - -3 - -VOUT - -3 - -SPICE instance: X_REG (regulator) - - - -W7 - - -W7 - -2x -  -X_REG:2:GND -     BK:GND     -X_MAIN:4:GND - - - -X_REG:3:VOUT -     V3V3     -X_MAIN:3:VCC - - - -  - -Nets: GND, V3V3 - - - -X_REG:e--W7:w - - - - - - -X_REG:e--W7:w - - - - - - -W9 - - -W9 - -2x -  -X_REG:2:GND -     BK:GND     -X_SENSOR:2:GND - - - -X_REG:3:VOUT -     V3V3     -X_SENSOR:1:VCC - - - -  - -Nets: GND, V3V3 - - - -X_REG:e--W9:w - - - - - - -X_REG:e--W9:w - - - - - - -X_MAIN - - -X_MAIN - -main_board - -7-pin - -1 - -USB_D+ - -1 - -2 - -USB_D- - -2 - -3 - -VCC - -3 - -4 - -GND - -4 - -5 - -SDA - -5 - -6 - -SCL - -6 - -7 - -ALERT - -7 - -SPICE instance: X_MAIN (main_board) - - - -W8 - - -W8 - -3x -  -X_MAIN:7:ALERT -     ALERT_SIG     -X_SENSOR:5:ALERT - - - -X_MAIN:6:SCL -     I2C_SCL     -X_SENSOR:4:SCL - - - -X_MAIN:5:SDA -     I2C_SDA     -X_SENSOR:3:SDA - - - -  - -Nets: ALERT_SIG, I2C_SCL, I2C_SDA - - - -X_MAIN:e--W8:w - - - - - - -X_MAIN:e--W8:w - - - - - - -X_MAIN:e--W8:w - - - - - - -X_SENSOR - - -X_SENSOR - -sensor_module - -5-pin - -1 - -VCC - -2 - -GND - -3 - -SDA - -4 - -SCL - -5 - -ALERT - -SPICE instance: X_SENSOR (sensor_module) - - - -TP_3V3 - - -TP - -SPICE ref: TP_3V3 - - - -W5 - - -W5 - -1x -  -     1:V3V3     -X_REG:3:VOUT - - - -  - -Net: V3V3 - - - -TP_3V3:e--W5:w - - - - - - -J_PWR - - -J_PWR - -BARREL_JACK - -2-pin - -VIN_RAW - -1 - -GND - -2 - -SPICE ref: J_PWR - - - -W1 - - -W1 - -2x -  -J_PWR:2:GND -     BK:GND     -X_REG:2:GND - - - -J_PWR:1:VIN_RAW -     VIN_RAW     -X_REG:1:VIN - - - -  - -Nets: GND, VIN_RAW - - - -J_PWR:e--W1:w - - - - - - -J_PWR:e--W1:w - - - - - - -W3:e--X_REG:w - - - - - - -W7:e--X_MAIN:w - - - - - - -W7:e--X_MAIN:w - - - - - - -W8:e--X_SENSOR:w - - - - - - -W8:e--X_SENSOR:w - - - - - - -W8:e--X_SENSOR:w - - - - - - -W5:e--X_REG:w - - - - - - -W2:e--X_MAIN:w - - - - - - -W2:e--X_MAIN:w - - - - - - -W9:e--X_SENSOR:w - - - - - - -W9:e--X_SENSOR:w - - - - - - -W1:e--X_REG:w - - - - - - -W1:e--X_REG:w - - - - - - diff --git a/docs/examples/hierarchical.yml b/docs/examples/hierarchical.yml deleted file mode 100644 index 9a6636f..0000000 --- a/docs/examples/hierarchical.yml +++ /dev/null @@ -1,160 +0,0 @@ -metadata: - title: 'Wiring diagram: hierarchical' - source: tests/fixtures/hierarchical.net - generator: spice2wireviz 2026.2.14 -connectors: - J_PWR: - type: BARREL_JACK - pinlabels: - - VIN_RAW - - GND - notes: 'SPICE ref: J_PWR' - TP_3V3: - type: TP - style: simple - pinlabels: - - V3V3 - notes: 'SPICE ref: TP_3V3' - J_USB: - type: USB_B_CONN - pinlabels: - - GND - - USB_DP - - USB_DM - notes: 'SPICE ref: J_USB' - X_REG: - type: regulator - pinlabels: - - VIN - - GND - - VOUT - notes: 'SPICE instance: X_REG (regulator)' - X_MAIN: - type: main_board - pinlabels: - - USB_D+ - - USB_D- - - VCC - - GND - - SDA - - SCL - - ALERT - notes: 'SPICE instance: X_MAIN (main_board)' - X_SENSOR: - type: sensor_module - pinlabels: - - VCC - - GND - - SDA - - SCL - - ALERT - notes: 'SPICE instance: X_SENSOR (sensor_module)' -cables: - W1: - category: bundle - colors: - - BK - - '' - wirelabels: - - GND - - VIN_RAW - notes: 'Nets: GND, VIN_RAW' - W2: - category: bundle - wirecount: 2 - wirelabels: - - USB_DM - - USB_DP - notes: 'Nets: USB_DM, USB_DP' - W3: - colors: - - BK - wirelabels: - - GND - notes: 'Net: GND' - W5: - wirecount: 1 - wirelabels: - - V3V3 - notes: 'Net: V3V3' - W7: - category: bundle - colors: - - BK - - '' - wirelabels: - - GND - - V3V3 - notes: 'Nets: GND, V3V3' - W8: - category: bundle - wirecount: 3 - wirelabels: - - ALERT_SIG - - I2C_SCL - - I2C_SDA - notes: 'Nets: ALERT_SIG, I2C_SCL, I2C_SDA' - W9: - category: bundle - colors: - - BK - - '' - wirelabels: - - GND - - V3V3 - notes: 'Nets: GND, V3V3' -connections: -- - J_USB: 1 - - W3: 1 - - X_REG: 2 -- - X_REG: - - 2 - - 3 - - W7: - - 1 - - 2 - - X_MAIN: - - 4 - - 3 -- - X_MAIN: - - 7 - - 6 - - 5 - - W8: - - 1 - - 2 - - 3 - - X_SENSOR: - - 5 - - 4 - - 3 -- - TP_3V3: 1 - - W5: 1 - - X_REG: 3 -- - J_USB: - - 3 - - 2 - - W2: - - 1 - - 2 - - X_MAIN: - - 2 - - 1 -- - X_REG: - - 2 - - 3 - - W9: - - 1 - - 2 - - X_SENSOR: - - 2 - - 1 -- - J_PWR: - - 2 - - 1 - - W1: - - 1 - - 2 - - X_REG: - - 2 - - 1 diff --git a/docs/examples/inter_module.png b/docs/examples/inter_module.png deleted file mode 100644 index 15dbec6..0000000 Binary files a/docs/examples/inter_module.png and /dev/null differ diff --git a/docs/examples/inter_module.svg b/docs/examples/inter_module.svg deleted file mode 100644 index 903ba60..0000000 --- a/docs/examples/inter_module.svg +++ /dev/null @@ -1,311 +0,0 @@ - - - - - - - - - -TP_VCC - - -TP - -SPICE ref: TP_VCC - - - -W3 - - -W3 - -1x -  -     1:RD:VCC     -X1:1:VCC - - - -  - -Net: VCC - - - -TP_VCC:e--W3:w - - - - - - -X1 - - -X1 - -power_supply - -2-pin - -1 - -VCC - -1 - -2 - -GND - -2 - -SPICE instance: X1 (power_supply) - - - -W5 - - -W5 - -2x -  -X1:2:GND -     BK:GND     -X2:2:GND - - - -X1:1:VCC -     RD:VCC     -X2:1:VIN - - - -  - -Nets: GND, VCC - - - -X1:e--W5:w - - - - - - -X1:e--W5:w - - - - - - -W6 - - -W6 - -1x -  -X1:2:GND -     1:BK:GND     -X3:1:GND - - - -  - -Net: GND - - - -X1:e--W6:w - - - - - - -X2 - - -X2 - -amplifier - -3-pin - -1 - -VIN - -1 - -2 - -GND - -2 - -3 - -VOUT - -3 - -SPICE instance: X2 (amplifier) - - - -W8 - - -W8 - -1x -  -X2:3:VOUT -     1:AUDIO_OUT     -X3:2:SIG_IN - - - -  - -Net: AUDIO_OUT - - - -X2:e--W8:w - - - - - - -X3 - - -X3 - -io_board - -4-pin - -1 - -GND - -2 - -SIG_IN - -3 - -SIG_OUT - -4 - -CTRL - -SPICE instance: X3 (io_board) - - - -J_CHASSIS - - -J_CHASSIS - -chassis_gnd - -2-pin - -EARTH - -1 - -GND - -2 - -SPICE ref: J_CHASSIS - - - -W1 - - -W1 - -1x -  -J_CHASSIS:2:GND -     1:BK:GND     -X1:2:GND - - - -  - -Net: GND - - - -J_CHASSIS:e--W1:w - - - - - - -W3:e--X1:w - - - - - - -W5:e--X2:w - - - - - - -W5:e--X2:w - - - - - - -W8:e--X3:w - - - - - - -W1:e--X1:w - - - - - - -W6:e--X3:w - - - - - - diff --git a/docs/examples/inter_module.yml b/docs/examples/inter_module.yml deleted file mode 100644 index 99f1250..0000000 --- a/docs/examples/inter_module.yml +++ /dev/null @@ -1,93 +0,0 @@ -metadata: - title: 'Wiring diagram: multi_board' - source: tests/fixtures/multi_board.net - generator: spice2wireviz 2026.2.14 -connectors: - J_CHASSIS: - type: chassis_gnd - pinlabels: - - EARTH - - GND - notes: 'SPICE ref: J_CHASSIS' - TP_VCC: - type: TP - style: simple - pinlabels: - - VCC - notes: 'SPICE ref: TP_VCC' - X1: - type: power_supply - pinlabels: - - VCC - - GND - notes: 'SPICE instance: X1 (power_supply)' - X2: - type: amplifier - pinlabels: - - VIN - - GND - - VOUT - notes: 'SPICE instance: X2 (amplifier)' - X3: - type: io_board - pinlabels: - - GND - - SIG_IN - - SIG_OUT - - CTRL - notes: 'SPICE instance: X3 (io_board)' -cables: - W1: - colors: - - BK - wirelabels: - - GND - notes: 'Net: GND' - W3: - colors: - - RD - wirelabels: - - VCC - notes: 'Net: VCC' - W5: - category: bundle - colors: - - BK - - RD - wirelabels: - - GND - - VCC - notes: 'Nets: GND, VCC' - W6: - colors: - - BK - wirelabels: - - GND - notes: 'Net: GND' - W8: - wirecount: 1 - wirelabels: - - AUDIO_OUT - notes: 'Net: AUDIO_OUT' -connections: -- - TP_VCC: 1 - - W3: 1 - - X1: 1 -- - X1: - - 2 - - 1 - - W5: - - 1 - - 2 - - X2: - - 2 - - 1 -- - X2: 3 - - W8: 1 - - X3: 2 -- - J_CHASSIS: 2 - - W1: 1 - - X1: 2 -- - X1: 2 - - W6: 1 - - X3: 1 diff --git a/docs/examples/single_module.png b/docs/examples/single_module.png deleted file mode 100644 index 7e63adf..0000000 Binary files a/docs/examples/single_module.png and /dev/null differ diff --git a/docs/examples/single_module.svg b/docs/examples/single_module.svg deleted file mode 100644 index 33f2159..0000000 --- a/docs/examples/single_module.svg +++ /dev/null @@ -1,189 +0,0 @@ - - - - - - - - - -amplifier_board - - -amplifier_board - -Module Interface - -4-pin - -VIN - -1 - -GND - -2 - -VOUT - -3 - -SIGNAL_IN - -4 - -SPICE subcircuit: .subckt amplifier_board - - - -W_J1 - - -W_J1 - -2x -  -amplifier_board:1:VIN -     VIN     -J1:1:VIN - - - -amplifier_board:2:GND -     BK:GND     -J1:2:GND - - - -  - -Nets: VIN, GND - - - -amplifier_board:e--W_J1:w - - - - - - -amplifier_board:e--W_J1:w - - - - - - -W_J2 - - -W_J2 - -2x -  -amplifier_board:3:VOUT -     VOUT     -J2:1:VOUT - - - -amplifier_board:4:SIGNAL_IN -     SIGNAL_IN     -J2:2:SIGNAL_IN - - - -  - -Nets: VOUT, SIGNAL_IN - - - -amplifier_board:e--W_J2:w - - - - - - -amplifier_board:e--W_J2:w - - - - - - -J1 - - -J1 - -PWR_CONN - -2-pin - -1 - -VIN - -2 - -GND - -SPICE ref: J1, nets: VIN, GND - - - -J2 - - -J2 - -SIG_CONN - -2-pin - -1 - -VOUT - -2 - -SIGNAL_IN - -SPICE ref: J2, nets: SIGNAL_IN, VOUT - - - -W_J1:e--J1:w - - - - - - -W_J1:e--J1:w - - - - - - -W_J2:e--J2:w - - - - - - -W_J2:e--J2:w - - - - - - diff --git a/docs/examples/single_module.yml b/docs/examples/single_module.yml deleted file mode 100644 index d9a58f7..0000000 --- a/docs/examples/single_module.yml +++ /dev/null @@ -1,67 +0,0 @@ -metadata: - title: 'Wiring diagram: simple_board' - source: tests/fixtures/simple_board.net - generator: spice2wireviz 2026.2.14 -connectors: - amplifier_board: - type: Module Interface - pinlabels: - - VIN - - GND - - VOUT - - SIGNAL_IN - notes: 'SPICE subcircuit: .subckt amplifier_board' - J1: - type: PWR_CONN - pinlabels: - - VIN - - GND - notes: 'SPICE ref: J1, nets: VIN, GND' - J2: - type: SIG_CONN - pinlabels: - - VOUT - - SIGNAL_IN - notes: 'SPICE ref: J2, nets: SIGNAL_IN, VOUT' - TP1: - type: TP - style: simple - pinlabels: - - N001 - notes: 'SPICE ref: TP1, nets: N001' -cables: - W_J1: - category: bundle - colors: - - '' - - BK - wirelabels: - - VIN - - GND - notes: 'Nets: VIN, GND' - W_J2: - category: bundle - wirecount: 2 - wirelabels: - - VOUT - - SIGNAL_IN - notes: 'Nets: VOUT, SIGNAL_IN' -connections: -- - amplifier_board: - - 1 - - 2 - - W_J1: - - 1 - - 2 - - J1: - - 1 - - 2 -- - amplifier_board: - - 3 - - 4 - - W_J2: - - 1 - - 2 - - J2: - - 1 - - 2 diff --git a/pyproject.toml b/pyproject.toml index bc0582b..bb9c031 100644 --- a/pyproject.toml +++ b/pyproject.toml @@ -35,7 +35,7 @@ Issues = "https://git.supported.systems/warehack.ing/spice2wireviz/issues" [project.optional-dependencies] asc = ["spicelib>=1.4.9"] -dev = ["ruff", "pytest", "pytest-cov", "wireviz>=0.4"] +dev = ["ruff", "pytest", "pytest-cov"] [project.scripts] spice2wireviz = "spice2wireviz.cli:main" diff --git a/src/spice2wireviz/cli.py b/src/spice2wireviz/cli.py index 46ccc4c..bee611e 100644 --- a/src/spice2wireviz/cli.py +++ b/src/spice2wireviz/cli.py @@ -146,12 +146,6 @@ def _parse_comma_list(ctx: click.Context, param: click.Parameter, value: str | N is_flag=True, help="Emit wiring BOM as CSV instead of WireViz YAML (requires full mapping).", ) -@click.option( - "-v", - "--verbose", - is_flag=True, - help="Show detailed parser notes (model/value heuristic decisions, etc.).", -) @click.version_option(version=__version__) def main( input_file: Path, @@ -178,14 +172,8 @@ def main( ltspice_exe: Path | None, bom: bool, bom_wiring: bool, - verbose: bool, ) -> None: """Convert SPICE netlist to WireViz YAML wiring diagram.""" - # --- Set parser verbosity --- - from .parser import netlist as netlist_module - - netlist_module.verbose = verbose - # --- Validate mutually exclusive BOM flags --- if bom and bom_wiring: click.echo("Error: --bom and --bom-wiring are mutually exclusive.", err=True) diff --git a/src/spice2wireviz/parser/netlist.py b/src/spice2wireviz/parser/netlist.py index 348872a..3fa48bd 100644 --- a/src/spice2wireviz/parser/netlist.py +++ b/src/spice2wireviz/parser/netlist.py @@ -48,11 +48,6 @@ _KNOWN_NET_PATTERN = re.compile( re.IGNORECASE, ) -# Module-level verbosity flag — controls whether informational notes -# (like model/value heuristic decisions) are printed to stderr. -# Set by the CLI's --verbose flag; defaults to False (quiet). -verbose = False - def _strip_comment(line: str) -> str: """Remove inline ; comments, respecting that ; inside quotes is literal.""" @@ -371,13 +366,12 @@ def _parse_boundary_component(tokens: list[str], prefix: str) -> SpiceComponent ): value = last nodes = positional[:-1] - if verbose: - print( - f"Note: treating '{last}' as model/value for {ref} " - f"(not as net name). If this is wrong, the net " - f"connection to '{last}' will be missing.", - file=sys.stderr, - ) + print( + f"Note: treating '{last}' as model/value for {ref} " + f"(not as net name). If this is wrong, the net " + f"connection to '{last}' will be missing.", + file=sys.stderr, + ) pins = [ SpicePin( diff --git a/tests/test_netlist_parser.py b/tests/test_netlist_parser.py index e51e569..e15616d 100644 --- a/tests/test_netlist_parser.py +++ b/tests/test_netlist_parser.py @@ -209,41 +209,16 @@ X1 NET1 NET2 NET3 NET4 small assert "extra nodes" in captured.err def test_model_value_heuristic_warning(self, capsys): - """I6: The model/value heuristic should warn when verbose is on.""" - from spice2wireviz.parser import netlist as netlist_module - - original = netlist_module.verbose - try: - netlist_module.verbose = True - text = """\ + """I6: The model/value heuristic should warn when it triggers.""" + text = """\ .subckt test A B J1 A B SOME_MODEL .ends test """ - parse_netlist(text) - captured = capsys.readouterr() - assert "SOME_MODEL" in captured.err - assert "model/value" in captured.err - finally: - netlist_module.verbose = original - - def test_model_value_heuristic_quiet_by_default(self, capsys): - """The model/value heuristic should be silent when verbose is off.""" - from spice2wireviz.parser import netlist as netlist_module - - original = netlist_module.verbose - try: - netlist_module.verbose = False - text = """\ -.subckt test A B -J1 A B SOME_MODEL -.ends test -""" - parse_netlist(text) - captured = capsys.readouterr() - assert "model/value" not in captured.err - finally: - netlist_module.verbose = original + parse_netlist(text) + captured = capsys.readouterr() + assert "SOME_MODEL" in captured.err + assert "model/value" in captured.err def test_duplicate_refs_both_parsed(self): """S3: Duplicate reference designators should both be parsed.""" diff --git a/uv.lock b/uv.lock index c25d60e..ca35d55 100644 --- a/uv.lock +++ b/uv.lock @@ -285,15 +285,6 @@ wheels = [ { url = "https://files.pythonhosted.org/packages/c7/4e/ce75a57ff3aebf6fc1f4e9d508b8e5810618a33d900ad6c19eb30b290b97/fonttools-4.61.1-py3-none-any.whl", hash = "sha256:17d2bf5d541add43822bcf0c43d7d847b160c9bb01d15d5007d84e2217aaa371", size = 1148996, upload-time = "2025-12-12T17:31:21.03Z" }, ] -[[package]] -name = "graphviz" -version = "0.21" -source = { registry = "https://pypi.org/simple" } -sdist = { url = "https://files.pythonhosted.org/packages/f8/b3/3ac91e9be6b761a4b30d66ff165e54439dcd48b83f4e20d644867215f6ca/graphviz-0.21.tar.gz", hash = "sha256:20743e7183be82aaaa8ad6c93f8893c923bd6658a04c32ee115edb3c8a835f78", size = 200434, upload-time = "2025-06-15T09:35:05.824Z" } -wheels = [ - { url = "https://files.pythonhosted.org/packages/91/4c/e0ce1ef95d4000ebc1c11801f9b944fa5910ecc15b5e351865763d8657f8/graphviz-0.21-py3-none-any.whl", hash = "sha256:54f33de9f4f911d7e84e4191749cac8cc5653f815b06738c54db9a15ab8b1e42", size = 47300, upload-time = "2025-06-15T09:35:04.433Z" }, -] - [[package]] name = "iniconfig" version = "2.3.0" @@ -1019,7 +1010,6 @@ dev = [ { name = "pytest" }, { name = "pytest-cov" }, { name = "ruff" }, - { name = "wireviz" }, ] [package.metadata] @@ -1031,7 +1021,6 @@ requires-dist = [ { name = "pyyaml", specifier = ">=6.0" }, { name = "ruff", marker = "extra == 'dev'" }, { name = "spicelib", marker = "extra == 'asc'", specifier = ">=1.4.9" }, - { name = "wireviz", marker = "extra == 'dev'", specifier = ">=0.4" }, ] provides-extras = ["asc", "dev"] @@ -1125,18 +1114,3 @@ sdist = { url = "https://files.pythonhosted.org/packages/55/e3/70399cb7dd41c10ac wheels = [ { url = "https://files.pythonhosted.org/packages/dc/9b/47798a6c91d8bdb567fe2698fe81e0c6b7cb7ef4d13da4114b41d239f65d/typing_inspection-0.4.2-py3-none-any.whl", hash = "sha256:4ed1cacbdc298c220f1bd249ed5287caa16f34d44ef4e9c3d0cbad5b521545e7", size = 14611, upload-time = "2025-10-01T02:14:40.154Z" }, ] - -[[package]] -name = "wireviz" -version = "0.4.1" -source = { registry = "https://pypi.org/simple" } -dependencies = [ - { name = "click" }, - { name = "graphviz" }, - { name = "pillow" }, - { name = "pyyaml" }, -] -sdist = { url = "https://files.pythonhosted.org/packages/68/31/26e518535ae54f540dae0e83e583240d4bae9a883a6213d751b7b0c00304/wireviz-0.4.1.tar.gz", hash = "sha256:0e25ad8c2e3a269a7dd4a7f45e4e8d304db7e0432b1843a620acfa6be70570e1", size = 50281, upload-time = "2024-07-13T11:29:30.319Z" } -wheels = [ - { url = "https://files.pythonhosted.org/packages/9d/7a/5fc147e36159bdf7ff70cdd239e48512384ce32708ef8410df8fd62b4cf8/wireviz-0.4.1-py3-none-any.whl", hash = "sha256:5dfdfec91e5d26e4f27f0f9d031672da7fb3c133d127167d233f4742f01873a2", size = 52083, upload-time = "2024-07-13T11:29:28.972Z" }, -]