warehack.ing/skywalker-1
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
skywalker-1/tools
History
Ryan Malloy 6e353c351f Add I2C hot-plug detection and streaming diagnostics (firmware v3.04.0) 
Phase D firmware hardening: vendor commands 0xBD (streaming diagnostics)
and 0xBE (I2C hot-plug detection) with Python library, bridge, and demo
support. All I2C operations use timeout-protected helpers, BCM4500 reads
are rate-limited during streaming, and frame counter reads use atomic
read-verify-reread pattern. Counters saturate instead of wrapping.
2026-02-15 18:24:45 -07:00
..
carrier_catalog.py Add DiSEqC motor control, QO-100 DATV reception, and carrier survey 2026-02-15 17:01:11 -07:00
eeprom_dump.py Extract real FX2 firmware from I2C EEPROM 2026-02-11 05:08:20 -07:00
eeprom_probe.py Extract real FX2 firmware from I2C EEPROM 2026-02-11 05:08:20 -07:00
eeprom_write.py Add EEPROM flash tool, TS analyzer, DVB-S2 investigation, and tune.py bugfix 2026-02-11 14:46:20 -07:00
fw_dump.py Add FX2 firmware dumps and USB probe tool 2026-02-11 04:51:34 -07:00
fw_load.py Add custom FX2 firmware and RAM loader for open-source development 2026-02-11 19:46:50 -07:00
motor.py Add DiSEqC motor control, QO-100 DATV reception, and carrier survey 2026-02-15 17:01:11 -07:00
qo100.py Add DiSEqC motor control, QO-100 DATV reception, and carrier survey 2026-02-15 17:01:11 -07:00
signal_analysis.py Add DiSEqC motor control, QO-100 DATV reception, and carrier survey 2026-02-15 17:01:11 -07:00
skywalker.py Add alternative operating modes: spectrum, scan, monitor, lband, track 2026-02-12 17:29:00 -07:00
skywalker_lib.py Add I2C hot-plug detection and streaming diagnostics (firmware v3.04.0) 2026-02-15 18:24:45 -07:00
survey.py Add DiSEqC motor control, QO-100 DATV reception, and carrier survey 2026-02-15 17:01:11 -07:00
survey_engine.py Add DiSEqC motor control, QO-100 DATV reception, and carrier survey 2026-02-15 17:01:11 -07:00
test_boot.py Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller 2026-02-12 10:34:15 -07:00
test_boot_debug.py Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller 2026-02-12 10:34:15 -07:00
test_i2c_debug.py Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller 2026-02-12 10:34:15 -07:00
test_i2c_isolate.py Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller 2026-02-12 10:34:15 -07:00
test_i2c_pinpoint.py Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller 2026-02-12 10:34:15 -07:00
ts_analyze.py Add DiSEqC motor control, QO-100 DATV reception, and carrier survey 2026-02-15 17:01:11 -07:00
tune.py Add alternative operating modes: spectrum, scan, monitor, lband, track 2026-02-12 17:29:00 -07:00
wine_memdump.py Extract firmware from official Genpix updater EXEs via Wine memory dump 2026-02-11 06:05:13 -07:00