No description
Ryan Malloy
23055f34ab
Firmware v3.02.0 adds three new vendor commands: - 0xB7 SIGNAL_MONITOR: fast 8-byte combined signal read - 0xB8 TUNE_MONITOR: tune + dwell + read in one round-trip - 0xB9 MULTI_REG_READ: batch read up to 64 indirect registers New tools/skywalker.py provides five modes that use the BCM4500's AGC registers as a crude power detector across 950-2150 MHz IF, even without demodulator lock: - spectrum: sweep analyzer with ASCII/waterfall/matplotlib display - scan: automated transponder scanner (sweep + peak detect + blind scan) - monitor: real-time signal strength for dish alignment - lband: direct input analyzer with L-band allocation annotations - track: carrier/beacon tracker with CSV/JSON logging and drift detection Extracts shared SkyWalker1 class and constants into skywalker_lib.py; tune.py now imports from the shared library. |
||
|---|---|---|
| docs | ||
| firmware | ||
| firmware-driver | ||
| firmware-dump | ||
| site | ||
| tools | ||
| .gitignore | ||
| dvb-s2-investigation.md | ||
| firmware-analysis-v206-vs-v213.md | ||
| gp8psk-driver-analysis.md | ||
| gpif-streaming-analysis.md | ||
| kernel-fw01-analysis.md | ||
| rev2-deep-analysis.md | ||
| skywalker1-hardware-reference.md | ||
| tuning-protocol-analysis.md | ||
| vendor-commands-unknown.md | ||