Add Textual TUI for SkyWalker-1 RF tool
Separate entry point (skywalker-tui) that reuses skywalker_lib.py unchanged. Five RF modes: spectrum, scan, monitor, lband, track — each with threaded USB bridge workers for non-blocking I/O. Includes --demo mode with synthetic signal generation (Gaussian peaks, noise floor, AGC simulation) for development without hardware. Custom widgets: spectrum bar chart, rolling waterfall, signal gauge, sparkline history, transponder table, device status bar.
This commit is contained in:
parent
c4bfe33d61
commit
64c33985a3
21 changed files with 2762 additions and 0 deletions
94
tui/src/skywalker_tui/bridge.py
Normal file
94
tui/src/skywalker_tui/bridge.py
Normal file
|
|
@ -0,0 +1,94 @@
|
|||
"""Thread-safe bridge between Textual async event loop and blocking pyusb calls.
|
||||
|
||||
All SkyWalker1 (or DemoDevice) methods are blocking I/O — they perform USB control
|
||||
transfers that can take 2-200ms each. Textual's event loop is asyncio-based, so
|
||||
calling these directly would freeze the UI.
|
||||
|
||||
The USBBridge wraps every device method behind a threading.Lock to prevent concurrent
|
||||
USB access (the BCM4500 can't handle overlapping control transfers) and exposes them
|
||||
as plain synchronous methods meant to be called from Textual @work(thread=True) workers.
|
||||
"""
|
||||
|
||||
import threading
|
||||
|
||||
|
||||
class USBBridge:
|
||||
"""Thread-safe wrapper around SkyWalker1 or DemoDevice."""
|
||||
|
||||
def __init__(self, device):
|
||||
self._dev = device
|
||||
self._lock = threading.Lock()
|
||||
|
||||
@property
|
||||
def is_demo(self) -> bool:
|
||||
return hasattr(self._dev, "_demo")
|
||||
|
||||
def open(self):
|
||||
with self._lock:
|
||||
if hasattr(self._dev, "open"):
|
||||
self._dev.open()
|
||||
|
||||
def close(self):
|
||||
with self._lock:
|
||||
if hasattr(self._dev, "close"):
|
||||
self._dev.close()
|
||||
|
||||
def get_fw_version(self) -> dict:
|
||||
with self._lock:
|
||||
return self._dev.get_fw_version()
|
||||
|
||||
def get_config(self) -> int:
|
||||
with self._lock:
|
||||
return self._dev.get_config()
|
||||
|
||||
def ensure_booted(self):
|
||||
with self._lock:
|
||||
self._dev.ensure_booted()
|
||||
|
||||
def signal_monitor(self) -> dict:
|
||||
with self._lock:
|
||||
return self._dev.signal_monitor()
|
||||
|
||||
def sweep_spectrum(self, start_mhz: float, stop_mhz: float,
|
||||
step_mhz: float = 5.0, dwell_ms: int = 10,
|
||||
sr_ksps: int = 20000, mod_index: int = 0,
|
||||
fec_index: int = 5, callback=None) -> tuple:
|
||||
with self._lock:
|
||||
return self._dev.sweep_spectrum(
|
||||
start_mhz, stop_mhz, step_mhz, dwell_ms,
|
||||
sr_ksps, mod_index, fec_index, callback,
|
||||
)
|
||||
|
||||
def tune_monitor(self, symbol_rate_sps: int, freq_khz: int,
|
||||
mod_index: int, fec_index: int,
|
||||
dwell_ms: int = 10) -> dict:
|
||||
with self._lock:
|
||||
return self._dev.tune_monitor(
|
||||
symbol_rate_sps, freq_khz, mod_index, fec_index, dwell_ms,
|
||||
)
|
||||
|
||||
def tune(self, symbol_rate_sps: int, freq_khz: int,
|
||||
mod_index: int, fec_index: int):
|
||||
with self._lock:
|
||||
self._dev.tune(symbol_rate_sps, freq_khz, mod_index, fec_index)
|
||||
|
||||
def set_lnb_voltage(self, high: bool):
|
||||
with self._lock:
|
||||
self._dev.set_lnb_voltage(high)
|
||||
|
||||
def set_22khz_tone(self, on: bool):
|
||||
with self._lock:
|
||||
self._dev.set_22khz_tone(on)
|
||||
|
||||
def configure_lnb(self, pol=None, band=None, lnb_lo=None,
|
||||
disable_lnb=False) -> float:
|
||||
with self._lock:
|
||||
return self._dev.configure_lnb(pol, band, lnb_lo, disable_lnb)
|
||||
|
||||
def blind_scan(self, freq_khz: int, sr_min: int, sr_max: int,
|
||||
sr_step: int) -> dict | None:
|
||||
"""Run blind scan at a single frequency. Returns result dict or None."""
|
||||
with self._lock:
|
||||
if hasattr(self._dev, "blind_scan"):
|
||||
return self._dev.blind_scan(freq_khz, sr_min, sr_max, sr_step)
|
||||
return None
|
||||
Loading…
Add table
Add a link
Reference in a new issue