skywalker-1/firmware/Makefile

FX2LIBDIR=fx2lib/
BASENAME=skywalker1
SOURCES=skywalker1.c
A51_SOURCES=dscr.a51
VID=0x09C0
PID=0x0203
CODE_SIZE=--code-size 0x3c00

include $(FX2LIBDIR)lib/fx2.mk

load: $(BUILDDIR)/$(BASENAME).bix
	../tools/fw_load.py $(BUILDDIR)/$(BASENAME).bix
Add custom FX2 firmware and RAM loader for open-source development Custom firmware (SDCC + fx2lib) implements all stock vendor commands (0x80-0x94) plus new commands for spectrum sweep (0xB0), raw BCM4500 register access (0xB1/0xB2), and blind scan (0xB3). Compiles to 6.3KB of code with healthy RAM margins. RAM loader (fw_load.py) uses the FX2 0xA0 vendor request to load firmware into RAM without touching EEPROM -- power cycle restores factory firmware. Supports Intel HEX and raw binary formats. 2026-02-11 19:46:50 -07:00			`FX2LIBDIR=fx2lib/`
			`BASENAME=skywalker1`
			`SOURCES=skywalker1.c`
			`A51_SOURCES=dscr.a51`
			`VID=0x09C0`
			`PID=0x0203`
			`CODE_SIZE=--code-size 0x3c00`

			`include $(FX2LIBDIR)lib/fx2.mk`

			`load: $(BUILDDIR)/$(BASENAME).bix`
			`../tools/fw_load.py $(BUILDDIR)/$(BASENAME).bix`