This firmware update utility will upgrade SkyWalker-1 firmware version to ver.2.13.x

##############################################################################################################
#
#  Make sure that genpix SkyWalker-1 is the ONLY genpix device connected to PC during firmware upgrade.
#  Disconnect all other genpix devices.
#
#  Do NOT switch the PC power off during firmware upgrade procedure.
#  Do NOT plug/unplug any USB devices during firmware upgrade procedure.
#
##############################################################################################################

SkyWalker-1 firmware updater runs in Windows x32/x64 environment only (Windows XP and higher).

To start firmware upgrade:
double-click on SW1_update_2_13_x.exe file, and follow the instruction on the screen.

Please Power-cycle the power of SkyWalker-1 aafter succesfull firmware update.
Use AC cord to do that (do not hot-(un)plug Molex power connector !!).
