52 lines
1.3 KiB
Markdown
52 lines
1.3 KiB
Markdown
|
# RS-UV3A Documentation
|
|||
|
|
|
|||
|
|
Documentation site for the HobbyPCB RS-UV3A VHF/UHF Tri-Band FM Transceiver.
|
|||
|
|
|
|||
|
|
Built with [Astro](https://astro.build) and [Starlight](https://starlight.astro.build).
|
|||
|
|
|
|||
|
|
## About the RS-UV3A
|
|||
|
|
|
|||
|
|
The RS-UV3A is a compact FM transceiver board designed by Jim Veatch (WA2EUJ) at HobbyPCB. It covers:
|
|||
|
|
|
|||
|
|
- **2m Band:** 136–174 MHz
|
|||
|
|
- **1.25m Band:** 200–260 MHz
|
|||
|
|
- **70cm Band:** 400–520 MHz
|
|||
|
|
|
|||
|
|
Features include on-board USB-serial, wide-range DC-DC converter (3.5V–16V), and Arduino/Raspberry Pi compatibility.
|
|||
|
|
|
|||
|
|
## Documentation Structure
|
|||
|
|
|
|||
|
|
- **Getting Started** — Quick start, connections, serial setup
|
|||
|
|
- **Guides** — Voice operation, packet/APRS, beacons, repeaters
|
|||
|
|
- **Reference** — Specifications, all 66 serial commands, connector pinouts
|
|||
|
|
- **Accessories** — RS-UVPA 5W power amplifier
|
|||
|
|
|
|||
|
|
## Development
|
|||
|
|
|
|||
|
|
```bash
|
|||
|
|
# Install dependencies
|
|||
|
|
npm install
|
|||
|
|
|
|||
|
|
# Start dev server at localhost:4321
|
|||
|
|
npm run dev
|
|||
|
|
|
|||
|
|
# Build for production
|
|||
|
|
npm run build
|
|||
|
|
|
|||
|
|
# Preview production build
|
|||
|
|
npm run preview
|
|||
|
|
```
|
|||
|
|
|
|||
|
|
## Source Material
|
|||
|
|
|
|||
|
|
Documentation is based on official HobbyPCB manuals:
|
|||
|
|
- RS-UV3A Rev A Manual
|
|||
|
|
- RS-UV3 Command Reference (Firmware 2.4A)
|
|||
|
|
- RS-UV3 Rev C Manual
|
|||
|
|
- RS-UVPA Manual
|
|||
|
|
|
|||
|
|
## Links
|
|||
|
|
|
|||
|
|
- [HobbyPCB Wiki](https://sites.google.com/site/hobbypcbrsuv3awiki/)
|
|||
|
|
- [Starlight Documentation](https://starlight.astro.build/)
|